Rasmussen XF-Kit CrossFire Series Complete Fireplace Log Set
Rasmussen's meticulous molding process requires pieces of real wood in order to develop their stunning log patterns. The ceramic refractory concrete used in the log construction results in a product that is high heat resistant while the expanded clay aggregates and rigid steel rod reinforcement guarantee extreme strength.
Features
- Heavy Duty Construction - Bonded refractory ceramic gas logs are reinforced with steel rods for excellent durability and longevity
- Hand Painted - Hand colored profile with careful detail to provide the most realistic looking logs
- Vented Unit - Designed for vented fireplace enclosures only, and must be used with a damper clamp
- Fuel Efficiency - Ceramic construction helps increase efficiency to lower operation costs
- Environmentally Friendly - Paint-free product that is odorless when burned
- Burner Compatibility - See configurables and/or chart below
- Valve Vanisher Option (VEI, VSP, VMV) - Rasmussen's Valve Vanisher configuration eliminates the "Big Ugly Box" hassle and prevents off-centering or downsizing of your log set to accommodate the controls; The Valve Vanisher can be applied to 15 to 30-Inch burners, helps keep your controls cooler, and raises your log set by 2.625 inches above the floor to make room for your controls
- Indoor Use - Designed for use indoors
Configurable Options
- Log Size - 18, 21, 24, 30-inch options
- Fuel Type - Choose from Propane or Natural Gas depending on your needs
- Burner - 4 burner options: F, CS, LC, CXF (some burners are compatible with the valve vanisher)
- Safety Pilot Kit - No safety pilot, manual pilot, remote ready pilot, variable flame pilot, or electronic spark to pilot
| Manufacturer | Rasmussen |
|---|---|
| Manufacturer Part Number | XF-Kit-Config |
| Made in USA | Yes |
Burner Downloads:
Safety Pilot Downloads:
Vented vs. Vent-Free
Vent type refers to how the fuel emissions are managed, your selection should be based on they type of firebox in your home and ensuring it meets your local codes.
Vented
- Most popular option for gas logs
- Gas logs must be used in a firebox with a working chimney flue
- Can be less efficient as a heat source because of the open chimney
Vent-Free
- Can be used in any approved firebox - with or without a flue
- Very efficient energy source as no heat is lost through the chimney
- Requires an oxygen depletion sensor to safely monitor gas emissions
- Some states do not allow vent-free units - check your local codes
Gas Supply
For gas log sets, burners will be supplied from the same gas that supplies the rest of your home.
Natural Gas
- Most common gas type for gas logs
- Almost all homes in urban/suburban developments will have access to natural gas
- Natural gas does not sink, which helps avoid the build-up of gas on the fireplace floor
Propane
- More common for rural homes
- Often runs off of a large stand alone propane tank
- Propane is heavier than air and will settle on the fireplace floor - a reason why most manufacturers require the use of a safety pilot kit to help burn excess gas before it settles
Choosing Gas Log Size
Know your fireplace dimensions - Measure front width, back width, the depth and the height of your firebox.
Before You Begin:
- Take clearances into account to avoid any overheating of combustibles
- Be sure to leave room on the sides for a valve/remote system if using them
- Gas log sets can range anywhere from 12 to 96 inches, but most common sizes range from 18 to 30 inches
Looking For a Custom Size?
- Many brands offer the ability to create custom logs/burners to fit any firebox
- Usually standard sized log sets will fit nearly any firebox but some fireboxes are unique
Ignition and Controls
Ignition/controls refer to how the gas log set is started.
Match Light
- Most basic and inexpensive ignition method
- Manually open your gas valve and light the burner with a lighter or match
- Flame height can be easily adjusted
- Very reliable - all mechanical parts (nothing should ever break)
Manual Safety Pilot
- A pilot system allows convenient ignition by having an open flame source that ignites the main burner when the gas valve is opened
- Features a standing pilot (the pilot light will stay lit at all times)
- Often times can be paired with a remote, wall switch, or thermostat
Electronic Ignition
- Similar to a manual safety pilot but allows the pilot to be lit automatically
- The pilot can be standing or intermittent (shut-off between uses)
- More energy efficient by shutting off the pilot in between uses
- Can be paired with a remote control, wall switch, or thermostat
Outdoor vs. Indoor
Because of their ceramic construction, many log sets can be used indoors or outdoors - with the proper considerations.
Indoor Log Sets
- Can use black steel or stainless steel burners with confidence
- All safety pilot options are able to be used
Outdoor Log Sets
- Be sure to use a stainless steel burner to withstand the elements
- Safety pilot kits may not be an option if you can't protect them from weather
- Match light is the most reliable option
Log Set Profiles
There are two types of log styles - one-sided and two-sided
One Sided Gas Log Sets
- For installation in a traditional fireplace with only one viewing angle
- Most common log set option - the logs are designed with this profile in mind
Two Sided Gas Log Sets
- Also referred to as "see through", "dual face", or even "peninsula" style log sets
- These logs are designed to have multiple viewing angles - either two sided or three sided in some cases
- Very contemporary option to join two rooms together with one fire feature
Because of the efforts of the Rasmussen family over four generations, the Rasmussen name is widely known for their innovative and elegant indoor and outdoor heating options. With gas log and media sets that combine with ultra high quality refractory ceramic construction, hand painted detail and USA roots, it is hard to find anyone in the industry who perfects decorative heating more than Rasmussen.
