All products available on our website qualify for free standard shipping. Standard shipping applies to standard locations within the contiguous 48 states. Spotix, Inc. reserves the right to choose delivery type, carrier, and service level of each shipment when standard shipping is selected. For freight shipments, standard shipping includes curbside delivery and liftgate services. Special considerations and fees may apply to certain delivery exceptions (e.g. deliveries to hard to reach areas).
Most items shipped via standard parcel service may be expedited for an additional cost to decrease shipping time or guarantee delivery by a certain date. This does not include processing time, which may or may not be altered subject to manufacturer resources and discretion. Items shipped via freight are shipped at the fastest available speed (Priority Freight) and are, therefore, unable to be expedited further.
Learn moreHearth Products Controls 1/2 Inch Straight Gas Fire Pit Shut Off Valve Kits provides an integral component for a gas appliance. The 1/2 inch straight ball valve features two 1/2 NPT female fittings while the standard 1/4 turn ball valve provides manual control over the flow of gas. The valve kit is complete with the 3 inch key and matching flange that feature a beautiful finish for an elegant appearance. This straight valve kit is specifically designed for use on a wall or in the floor and is rated for 150,000 BTU or fewer. Note: HPC flanges and HPC valves feature a 1/2-inch insert to fit 1/2-inch valves, but this insert can be removed for 3/4-inch fittings.
| Manufacturer | Hearth Products Controls |
|---|---|
| Manufacturer Part Number | MS-Config |
| Key Length | 3 Inch |
| Valve Size | 1/2 Inch |
| Recomended Capacity (BTUs) | 150k or less |
| Made in USA | No |
| Manufacturer Part Number | MS-Config |
| Fuel Type | Propane |
HPC is on the cutting edge of outdoor gas fire pit technology and offers a wide variety of burners to fit the need of any construction or do-it-yourself project. All HPC fire pit rings have staggered burner ports for a more natural-looking flame pattern and presence. Both stainless steel and cold rolled steel burners are available, and both feature ports that are drilled, not punched, for optimal quality; the burner hub is raised above the concentric rings to reduce the risk of water in the valve or gas line.
